Manufactured
under a quality system approved to ISO 9002, Ertalyte is precision
machined to individual customers' requirements. Ertalyte offers
a high mechanical strength, stiffness and hardness, very good
creep resistance, a low and constant coefficient of friction,
a low stick-slip sensitivity, outstanding wear resistance and
very good dimensional stability. In addition, Ertalyte is physiologically
inert.
Ertalyte's innovative properties make the
material ideally suitable for the manufacture of mechanical
precision parts which have to sustain high loads and/or are
subject to wear.
|
 |
Typically such parts include:
|
|
|
|
|
| |
For unlubricated moving parts applications,
there is an internally lubricated bearing grade called Ertalyte
TX. Incorporating a uniformly dispersed solid lubricant, Ertalyte
TX is described as being particularly suitable for the manufacture
of sliding parts where low friction, long wear, high load-bearing
capacity and a very good dimensional stability are required.
Application examples include precision engineering and machine
construction.
|
| |
 |
|
Ertalyte TX has a superior wear resistance, a
lower coefficient of friction and very high pressure-velocity
capabilities. At the same time, there is good chemical resistance
(with the exception of alkaline solutions), very good machineability,
a moderate impact strength and good electrical properties. |
| |
The Ertalyte series, which
forms part of the Erta family of engineering plastics stock
shapes,
is available as:
- Rods (10 mm - 150 mm),
- Sheets (thickness
8 mm - 100 mm)
- Tubes (outside diameter 20 mm
- 200 mm).
Dotmar EPP can also supply non-standard
configurations on request. |
|
| |
|
|
